TORTFEEDER / SOURCED ASSEMBLY

3D assembly explorer

LOCAL · NO DEVICE CONNECTIONEngineering checks Parts & BOM ↗Enclosure & guards R3

Flow preview ready

Purchased Printed Selection / fit open

Parked / hatch closed0.0 s · preview

SELECT A PART

Inspect the real components.

Select a part in the assembly or index. Each callout links back to the sourced BOM.

Rotating component preview

This is a dimensional visual reconstruction. Vendor CAD, unspecified internals, mounting holes and the full assembly have not been certified for fit. The thicker insulated shell and geared-motor mounts remain open design work. Service enclosure skins, vents and battery shelf are fabrication concepts; the battery model is not selected.

Current design brief

What the geometry means

Selected motors, pans, rails and major equipment use listed exterior dimensions where available. Details such as screws, moulding, ribs, taper and wiring are reconstructed for recognition. Amber parts are selection or fit placeholders. Exterior accessories and the rear 1.70 × 0.75 × 1.75 m service bay extend beyond the approved frame. Clear acrylic view shows real acrylic skins with insulation removed for inspection; it is not a thermal-equivalent refrigerator. Food trajectories and water volumes are illustrative, with no adhesion or fluid solver. This view shows placement and motion; engineering checks remain in the separate studio.

Whole feeder